Rear motors start to stutter and get hot in no time
I have a brand new qq190 with a DX8 and SPM4648 as receiver. Setup was as easy as promised but something is wrong with the control of the rear motors. As soon as I speed up the props the rear motors start to stutter and get hot in no time. I tried this and that, but without any success so far. Since both motors are affected, i suppose the fault should come from the flightcontroller… Where should I go on with my investigation?
You need to fly it, It will exhibit behavior like that on the bench. We recommend that you start over, load the firmware from TBS agent, go through the RC Calibration procedure, then see how it flies.
The motors will speed up and stutter when it is on the bench without props.
well, the quad hasn’t had any liftoffs so far. Got it from Amainhobbies last week. It happens in every mode. I’ll check the release tomorrow, since i’m a Mac user i’ll have to do this with betaflight, i guess this should work anyway.
Can you verify what software your QQ190 is running? We recommend running a BF 3.1.0QQ or 3.1.5QQ release available via the TBS Agent. http://agent.qq190racingdrone.com
Doe it exhibit this issue with props on while flying? or does it happen on the bench? What flight mode does it happen in?
I checked the running software with Betaflight and it says 3.1.5. Still no idea what could be wrong
The quad will not exhibit normal behavior without props on. This is a condition of Betaflight.