Anthony Jacobs | Reputations

Anthony Jacobs 2.10K Rep.
Selected an answer as best
13 hours ago 2
Received an upvote
13 hours ago 10
Posted an answer
qq190 cant swim

Did it plop right in?   We were thinking about developing a submarine mode but we thought that developing a drone was enough for now... During R&D we have had them drop in puddles and end up just...

17 hours ago 5
Commented on a post

The Reset should only reset the throttle calibration, your channel shouldn't change. If it does, it should be a quick reset of your goggle channels before you are flying again.

April 13, 2019 2
Posted an answer
Enable gyro 32kHz sampling mode, Gyro update frequency, PID loop frequency question

Hi,   the QQ110, that frame doesn't ring a bell?  can you clarify which frame you are flying? QQ190? QQ220? QQ160? or QQ220?

April 13, 2019 5
Posted an answer
Should I buy a used FPV Goggle?

Hi there,  I think that if you can get Fatshark Dominator V2s, you will be fine.  That is the goggle that I rock. One thing to note is that Fatshark goggles are the original and fantastic in terms of...

April 13, 2019 5
Posted an answer
Cant figure out what to do

Hi Mark. I'm surprised that it isn't working after cleaning . There is conformal coating on the electronics that should keep things from frying in the presence of water but blood is probably more conductive...

April 3, 2019 5
Posted an answer
QQ190 – Motors continue to accelerate even when throttle is low.

I'm happy to help 😊. Holding the button during power up should have put the osd into default calibration. See page 27 of the manual here. https://drive.google.com/a/quadquestions.com/file/d/0B4vs1qfDGt6AWWJTM25CUGt2Ymc/view?usp=drivesdk...

April 3, 2019 5
Posted an answer
QQ190 – Motors continue to accelerate even when throttle is low.

Hi Jeremy,  Thank you for posting here.  That is a very strange problem indeed.  It could be possible that your throttle is not calibrated to zero.  Can you take off the props and see what betaflight...

April 3, 2019 5
Posted an answer
New in town

Hi Larry welcome to Denver! Thank you for posting here. Have you checked out multigp?  MultiGP is great way to meet other pilots in the area.  Check out http://multigp.com You can find guys that...

March 29, 2019 5
Posted an answer
Sparrow R5 parts

Dear Allen,  Thanks for the kind words. How about this?  If QuadQuestions goes away, I will publicly post all of the files to build the kits.  We aren't planning on going anywhere, but we are working...

March 22, 2019 5
Posted an answer
V Tail whoopi quadcopter frame

I haven't personally built one, but I trust Oscar's opinion. Things I would worry about is heat expansion, and brittleness/strength issues.  I would print it in ABS if possible. Here is a link to...

March 21, 2019 5
Posted an answer
Sparrow R5 parts

Hi Allen, Thank you for using our forum to communicate with us! We've got the design finished for the R5, however due to  changes in the industry and lack of major interest in the Sparrow line,  We...

March 18, 2019 5
Posted an answer
Simple Drone Build

It is possible, but the limitation might end up being flight time.  How long do you need to keep the drone in the air for this challenge?  The time aloft can have a big impact on the design of the drone...

March 6, 2019 5
Posted an answer
From www.xclassracers.com Cables and connectors

Hi. We can special order them for you.  They would ship from Denver. If we don't need to manufacture them then we could have them in Denver in 3-5 business days. Let me know how many you need so I can...

March 4, 2019 5
Posted an answer
tip speed of a 5 ft. propeller

Think about it Find the circumference. Using a 5' diameter, multiply the diameter times pi. 5' * 3.141 = 15.708' Divide 16000rpm by 60 to get rotation per seconds 266.667 rotations per second Multiply...

March 3, 2019 5
Posted an answer
OTG and TBS ground station

That's awesome. I'm so glad we have helped you get flying! We actually use 5.8ghz to rebroadcast the 2.4ghz video signal most times when we are flying long range . The TBS groundstation ships with a greenhorn...

February 2, 2019 5
Posted an answer
Where is the read me file for my Taranis X9D setup files for my SD card???

Check out the readme below: Let us know if you have any questions . https://quadquestions.com/product/taranis-qav250-model-settings-support-files-included/ Hopefully these files can help to...

February 2, 2019 5
Selected an answer as best
January 28, 2019 2
Answer was selected as best
QQ190 Flight Controler

Hi Jeff, Just making sure you saw this: Here is a link to your order, once paid, it will automatically ship.  If paid before 2pm MST it should go out today. Customer payment page → Let me know...

January 28, 2019 10
Load More