The breakout cable for the naze32 is available here that you can use to hook up to a standard receiver.
To use this, configure the Naze32 without feature ppm and then run to your Rx.
For standard (non-PPM) receivers,2 connect all three wires (ground, 5V, and signal) from Channel 1 from your receiver onto the top left three pins (ground on the left, 5V, then signal on right). Channels 2-8 only need the signal wires from the receiver.
It is possible to use a spectrum radio with the Naze32. You have to either use a breakout cable, or get a Lemon Receiver capable of PPM that works with your radio’s technology. So if you have a DSMX radio, you need a Lemon DSMX PPM receiver. If your radio is only DSM2, then you need a Lemon DSM2 receiver.
- Views962 times
- Answers2 answers